10 IT 400 MID

This transducer in 3 Inch voice coil (underhung design) makes it one of the sharpest Mid range transducers in its category.

Tonal quality is crystal clear & very sharp and is advisable to use this in Line Array or Point source. Suitable for Bass
Reflex / Ported Enclosure.

Key Features
Program Power 800 W
Voice Coil 76.2 mm (3 in)
Response 95-7000 Hz
Sensitivity 1W/1M 98 dB

Specification

Nominal Diameter 261 mm
Nominal Impedance 8 Ω
Nominal Power Handling(AES) 400 W
Program Power 800 W
Sensitivity (1W/1m) 98 dB
Frequency Range 95-7000 Hz
Magnet Material Ferrite
Voice Coil Diameter 76.2 mm ( 3 in)
Winding Material CCAW
Former Material Glass Fibre
Winding Type In/Out

Parameters

Resonant Frequency FS 95 Hz
DC Resistance Re 6.6 Ω
Electrical Q Qes 0.39
Mechanical Q Qms 5.61
Total Q Qts 0.37
Compliance Equivalent Volume vas 19 Ltrs
Peak Diaphragm Displacement Volume Vd 0.05 Ltrs
Effective Surface Area of Cone Sd 363.1 cm^2
Reference Efficiency ƞo 3.86%
Moving Mass including air load Mms 28.12 gms
Motor Strength Bl 16.81 T-m
Voice Coil Inductance @ 1 KHz Le 0.53 mH
Efficiency Bandwith Product EBP 244 Hz
Voice Coil Overhang Xmax ±1.50 mm

Mounting Info

Overall Diameter 261 mm
Bolt Circle Diameter 245 mm
Baffle Cutout Diameter 234 mm
Depth 120 mm
Flange and Gasket Thickness 13 mm
Gross Weight 7.760 Kg.

Recone Kit

Recone Kit Number REC10IT400MID
Product Enquiry